The Sawtooth wave wave jig is one of the main equipment for gravity beneficiation. Because of its large working capacity, wide coverage of sorting particle size distribution, high utilization rate and excellent effect, the Sawtooth wave wave jig is widely used in the mining and gold mining ships of nonferrous plate metallurgical industry mines for sorting placer gold, tin, tungsten, lead, zinc, antimony, manganese, diamond, copper and other nonferrous plates. The JT4-2 and JT1.5-2 zigzag wave large particle jigs in this category can provide ore with a larger particle size distribution of 30MM, and ore is discharged on the screen and below the screen. The Sawtooth wave wave jig is used in the concentrator of Baryte powder ore, manganese ore, copper ore and other iron ores, which has the advantages of wide distribution range of ore feeding particle size and significantly reduced flow of make-up water under the screen.
Traditional jigs are often driven by circular axial force, and their jigging pulsating beverage curves are often sinusoidal. Due to the consistent increase and decrease in water flow speed and efficacy time caused by diaphragm fitness exercise, it is not conducive to loose jigging material layer and proportional layering of mineral particles, which further endangers the selection and utilization of machine equipment.
The Sawtooth wave wave jig is a kind of environmental protection and energy saving reselection machine equipment that is basically developed and improved on the basis of the traditional jig according to the hierarchical regularity of the basic theory of jigging material layer. Its jigging pulse beverage curve is zigzag, making the rising water flow faster than the falling water flow: the gain value is short, and the Fall time is long; Eliminating the drawbacks of sine wave and pulsating beverage curve caused by the jig, such as raising and reducing water flow, as well as the same efficiency time, it improves the looseness of the material layer, reduces the suction efficiency, and enables the heavy mineral particles in the minerals to obtain sufficient foundation settlement, further improving the sorting ability and utilization rate of the machine equipment. Compared with the sine wave jig, it increases by 3.01% for Sn, 5.5% for W5.5%, 1.63% for Pb, and 2.04% for Zn; The water consumption is reduced by 30% -40%, the floor area is reduced by 1/3, and the four stroke is adjustable because an electromagnetic induction regulating motor is used for dragging, making the stroke speed infinitely adjustable. Its characteristics have reached the excellent level in China, making it one of the ideal environmentally friendly and energy-saving re selection machines and equipment at present.
Advantages and characteristics of Sawtooth wave wave jig
1. Large working capacity and wide coverage of sorting granularity distribution;
2. High aggregation ratio and high utilization rate;
Easy to install, easy to operate, and easy to maintain;
The zigzag wave jig pulsating beverage curve makes it easier for heavy mineral substances to move downwards;
5 saves 30-40% water compared to traditional jigs;
6. Choose an electromagnetic adjustable speed motor;
7 It is suitable for separating placer gold, tin, titanium, hematite, copper, coal and other minerals, especially widely used in manganese ore, barite powder concentrator industry.
The Sawtooth wave wave jig is one of the main equipment for gravity beneficiation. Because of its large working capacity, wide coverage of sorting particle size distribution, high utilization rate and