The spiral chute has high efficiency gravity concentration equipment of China's excellent standard. The beneficiation spiral chute is used to separate iron, tin, tungsten, tantalum, niobium, gold ore, coal mining, monazite, Rutile, zircon and other metal materials and mining enterprises with sufficient proportion difference from 0.3-0.02mm fine sand. Ganzhou Jinqiang Mining Equipment is a professional manufacturer of beneficiation spiral chute.
2、 Structure and Materials of Mineral Processing Spiral Chutes
The beneficiation spiral chute is composed of six parts: a feeding homogenizer, a feeding trough, a spiral chute, a commodity extraction trough, a commodity gathering hopper, and a trough support frame (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is a key component. The spiral plate is made of fiberglass anti-corrosion (fiberglass elastomer material) and connected together with anchor bolts. The selection surface of the spiral chute has a wear-resistant layer of prefabricated components. It has the advantages of lightweight, sturdy, and durable daily necessities. The upper side of the spiral chute is equipped with a multi tube feeding homogenizer to evenly distribute the ore, making it easy to operate. The ore separator is randomly placed on the cross (or tripod) of the support table. The evenly divided coal slurry is slowly fed to the surface of the spiral groove by the feeding groove at the head end of the spiral groove for screening. The tail of the beneficiation spiral chute is installed in a valve block type new product extraction tank, and the screened new products are divided into three (or four) new products according to grade along the axis. Change the total extraction width of each new product by adjusting the position of the valve block. The new product gathering bucket is a circular tube that gathers and guides the extracted double head ore flow separately. The cross-section of the beneficiation spiral chute and the tangent slope transformation of the curve are particularly suitable for the selection of fine particle raw materials. The spiral chute has the advantages of simple structure, no fitness sports parts, light weight, low noise, and convenient installation and maintenance.
The hardness of metal composite materials commonly used in mineral processing spiral chutes is 9, second only to bare drills with a hardness of 10.
3、 The main purpose of the beneficiation spiral chute is:
The beneficiation spiral chute is suitable for screening copper ore, Ilmenite, Chromite, Bauxite, zircon, Rutile, monazite, phosgenite, tungsten ore, tin ore, tantalum ore, niobium ore and other rare metals, non-ferrous metals and mining enterprises with different proportions of coarse materials with a particle size distribution of 0.3-0.02mm. The beneficiation spiral chute has the advantages of smooth and easy operation throughout the entire beneficiation process, wide range of allowable changes in ore concentration values, high aggregation ratio, high utilization rate, small land occupation, low water consumption, simple structure, no need for driving force, large output, simple installation, convenient practical operation, and good investment effect.
4、 Operation method and basic principle of grooved spiral chute:
Erect the grooved spiral chute, correct the bisector, fix it in a suitable position with iron frame or wood, send the stone sand to the two feed outlets of the spiral top by the sediment pump, add water for filling, adjust the concentration value of the mineral slurry, of course, the mineral slurry swirls from high to low, causing an inertial Centripetal force in the rotating slope water flow, depending on the difference in the proportion, particle size distribution and appearance of the stone sand, According to the force of vortex flow and the effect of Centripetal force, the ore and sand are separated, the titanium concentrate is injected into the titanium concentrate bucket and connected in series with pipelines, the industrial waste slag flows to the industrial waste slag bucket and receives the sand pool with pipelines, and then is discharged by the sediment pump. The grooving spiral chute completes the whole process of the concentrator.
5、 Application scope of grooved spiral chutes:
The grooved spiral chute is used to separate iron, tin, tungsten, tantalum, niobium, gold ore, coal industry, monazite, Rutile, zircon and other metal materials and mining enterprises with sufficient proportion difference from 0.3-0.02mm fine sand.
Looking for a manufacturer of mineral processing groove spiral chutes, we are looking for Ganzhou Jinqiang Mining Equipment. The manufacturer sells directly and provides complete services. Welcome to consult and purchase.
The spiral chute has high efficiency gravity concentration equipment of China‘s excellent standard. The beneficiation spiral chute is used to separate iron, tin, tungsten, tantalum, niobium, gold ore,