The three disk magnetic separator PC-3600 is a dry high intensity magnetic separator. This three disc magnetic separator equipment is suitable for titanium ore and high tin, black and white tungsten; The sorting and selection of weakly magnetic minerals such as tin sand.
1、 Structural features of the three disk magnetic separator: 1. This three disk magnetic separator has stable performance, strong adaptability, and is easy to install, operate, and maintain. 2. The main machine of a three disc magnetic separator consists of a feeding part, a transmission part, and a magnetic field part. 3. The electric control system of the three disc magnetic separator consists of power supply, control, rectification, and work indication parts.
2、 Operating methods and precautions for the three disk magnetic separator:
1. Dry materials are screened and loaded into the feed hopper. The particle size is required to be 2 mm. 2. Adjust the working clearance of the disk according to the mineral separation, particle size and mineral processing requirements. 3. Close the knife switch to supply power to the console. 4. Open the motor and magnetic field switch of the three disk magnetic separator. Adjust the Pressure regulator to the appropriate current. 5. Open the feed valve to make the materials evenly fall onto the transport belt. 6. Stop feeding before the three disk magnetic separator stops. 7 Precautions for operating a three disc magnetic separator:
① When there are not many magnetic minerals in the raw material, the feeding layer should be thinner to improve the recovery rate; When the content of magnetic minerals is high, the feeding layer can be thicker When the working gap of the three disk magnetic separator disk is fixed, changing the current size can adjust the magnetic field strength; When the current is constant, changing the current magnitude can adjust the magnetic field strength; When the flow is constant, adjust the working gap of the disk to adjust the magnetic field strength The three disc magnetic separator processes minerals with strong magnetism and selects weak magnetic fields, while processing minerals with weak magnetism and scanning operations use strong magnetic fields The size of the disk work gap depends on the particle size of the processed raw materials and the job requirements; When dealing with coarse levels, it should be larger, and when dealing with fine levels, it should be smaller; Reduce the scanning time gap to improve the recovery rate, and increase the gap during selection to increase the selection of separation and improve the grade of magnetic products. However, at the same time, increase the current to compensate for the reduced magnetic field strength caused by increasing the working gap. ⑤ When the three disc magnetic separator is working, strong magnetic tools and items should not be near the magnetic system
The three disk magnetic separator PC-3600 is a dry high intensity magnetic separator. This three disc magnetic separator equipment is suitable for titanium ore and high tin, black and white tungsten;