Roll crusher, a mining equipment, also known as roll crusher. Key to crushing iron ore. The hydraulic twin roll crusher is equipped with the manufacturer's equipment, which has the advantages of small size, large crushing ratio (5-8), low noise, simple structure, convenient maintenance, uniform particle size distribution of crushed raw materials, low over crushing rate, convenient maintenance, smart over pressure protection, reliable and other characteristics. The hydraulic roller crusher is suitable for crushing large and medium-sized coal mines or clean coal (including coal gangue) in fields such as coal, metallurgical industry, mining, chemical plants, decorative building materials, etc. The hydraulic twin roll crusher has a large crushing capacity. The motor and reducer are connected by a limited distance Fluid coupling to avoid driving force load. The inductor is reliable for over-voltage protection. Adjusting the hydraulic press between toothed rollers, centralizing and moistening the toothed working roller bearings. Tooth type reliability design, tensile Shear stress selection and grinding, high efficiency and low consumption, and well proportioned granules.
The hydraulic roller crusher has a simple structure, occupies small indoor space, and is more convenient for practical operation and maintenance. Equipped with anti fouling plates internally, with good sealing characteristics, it prevents the splashing of fine raw materials after crushing, reduces smoke and dust, reduces noise during work, and greatly improves the office environment. The reliability design of the wear-resistant material roller body has been carried out again. The hydraulic roller crusher manufacturer's machine equipment does not need to replace the ball mill roller body for a lifetime, while the old type roller crusher requires disassembly and maintenance, and the roller body needs to be replaced after one year of application. A crusher equipment used for the crushing of various raw materials such as light burned dolomite, mining, and stone materials.
Hydraulic roller crushers are commonly used for crushing light burned dolomite, sand making, decorative building materials, mining, chemical plants, stainless steel plate light burned dolomite and other fields!
The key component of the hydraulic roller crusher is composed of fixed and theme active crushing rollers, clamping and adjusting equipment, and their pushing equipment. The key is based on the impact, kneading, and grinding effects of the cylindrical two rollers on the raw material extrusion molding.
The crushing organization of a hydraulic roller crusher is composed of a pair of cylindrical rollers installed parallel to each other and horizontally. When the pair of roller seats rotate in opposite directions, the raw materials inside the feeding mouth are added and fall on the top of the roller under the effect of the sliding friction force on the surface of the roller and its own force. It is pulled into the middle of two rotating rollers, and suffers from the extrusion forming impact, cutting and rubbing from the roller. When the effect of this force exceeds the cohesive force in the middle of the Lattice constant of the object, the raw materials are broken into small pieces to achieve the goal of crushing. The raw materials crushed by the hydraulic roller crusher are released by the rotating roller and unloaded downwards.
Roll crusher, a mining equipment, also known as roll crusher. Key to crushing iron ore. The hydraulic twin roll crusher is equipped with the manufacturer‘s equipment, which has the advantages of small