The seaside sand tin gravity separation production line is a common ore sorting equipment, whose main function is to gravity select the sand tin ore, separate impurities such as cassiterite and quartz, and thereby improve the grade and production of cassiterite. This article will introduce the operating steps of the seaside sand tin gravity separation production line, helping readers better understand and master the usage methods of the equipment.
1、 Equipment Introduction
The seaside sand tin gravity separation production line is a type of equipment that adopts the principle of gravity separation. It mainly consists of feeding hopper, vibrating feeder, screening machine, gravity separator, intermediate tank, washing machine, tailings tank, and other components. The equipment has the advantages of simple structure, convenient operation and good separation effect, and is widely used in the ore separation work of Xikuangshan Mine Mine.
2、 Operating Steps
1. Equipment installation
Before operating the seaside sand tin gravity separation production line, it is necessary to first install the equipment. The specific operation steps are as follows:
(1) Place the equipment on a flat surface to ensure its stability.
(2) Connect and assemble the equipment according to the installation drawings.
(3) Check whether all components of the equipment are securely connected and whether there is looseness or air leakage.
2. Equipment debugging
After the installation of the equipment is completed, it is necessary to carry out debugging work to ensure the normal operation of the equipment. The specific operation steps are as follows:
(1) Start the vibrating feeder and evenly feed the sand tin ore into the screening machine.
(2) Adjust the mesh size of the screening machine so that impurities such as quartz can smoothly pass through the mesh, while cassiterite is screened out.
(3) Adjust the water flow and tilt angle of the gravity separator to ensure that the cassiterite can smoothly settle into the intermediate tank.
(4) Start the washing machine and clean the cassiterite to remove sediment and debris.
3. Equipment maintenance
During the normal operation of the equipment, regular equipment maintenance work is required to extend its service life. The specific operation steps are as follows:
(1) Regularly clean up debris and sediment inside the equipment to maintain its cleanliness.
(2) Check all components of the equipment for wear or damage, and replace damaged components in a timely manner.
(3) Regularly lubricate and maintain the equipment to ensure its normal operation.
The seaside sand tin gravity separation production line is a common ore sorting equipment, and its operating steps include three aspects: equipment installation, equipment debugging, and equipment maintenance. When operating equipment, it is necessary to pay attention to safety and ensure the normal operation of the equipment. At the same time, regular equipment maintenance and upkeep can extend the service life of the equipment, improve its efficiency and sorting effect.