news

Where does the spiral chute produce? 1. It shows that the spiral chute combines the characteristics of the spiral concentrator, gravity separation spiral chute, shaking table and gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgical Industry, and the operation appraisal of the design, universities, concentrators and other units, it is believed that the mechanical performance is excellent, and the separation goal is improved. It has also won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be aggregated and exported. The cross section of the spiral concentrator and the change in slope of the curve are very suitable for the selection of fine-grained ore materials. Where does the spiral chute produce ? 3. Features or advantages 1. It is heavy and has strong processing capacity. Today's mineral aggregate processing is objectively conditional on large-scale use to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. Where is the spiral chute produced? 4. The chute can be divided into three categories according to the particle size of the processed ore materials: (1) Coarse chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. Where does the spiral chute produce? 5. The scope of use of the GRP spiral chute is suitable for the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, placer tin ore, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth or other metal and non-metallic mineral materials with sufficient Density contrast. Where are the spiral chutes produced at