news

Model 1 of Spiral Chute: Equipment Introduction: A gravity beneficiation machine used for separating light and heavy minerals through continuous centrifugal force during rotary spiral motion of mortar. 2、 The method of use is to set up the fiberglass chute, calibrate the vertical line, use an iron frame or wood to fix it in the appropriate position, and use a slurry pump to send the sand ore to the two feeding ports on the spiral head to supplement water and adjust the density of the mineral sand slurry. The mineral sand slurry naturally rotates from top to bottom, and an inertial centrifugal force occurs in the flow speed of the rotating inclined plane, which varies in density, specific gravity, particle size, and morphology of the sand ore, Under the action of swirling gravity or centrifugal force, the sand and ore are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are piped to the sand pit. Then, they are discharged by a sand pump, completing the entire beneficiation process. Spiral chute model III. Features and highlights: 1. Heavy duty, high processing yield, and the objective demand for contemporary mineral processing is to create benefits through economies of scale. 2. Fine granulation: the treatment of fine and small particle size minerals is very important for the treatment of ore materials with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple application of gravity and water flow blocking force to composite application of centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals and the separation of fine or fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation, environmental protection and consumption reduction as the basic starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. spiral chute model 4. The chute can be divided into three categories according to the particle size of the processed ore material: (1) coarse chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. Spiral chute model 5. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore sand, tin ore, tantalum ore, niobium and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals derived from gravity differences, with Granularity of 0.3-0.02mm. Spiral Chute Model