news

Rotating Spiral Chute 1. Product Introduction: A gravity beneficiation equipment that utilizes the inertial centrifugal force that occurs during the spiral rotation movement of mineral pulp to separate light and heavy mineral materials. 2、 The application method is to establish a fiberglass spiral chute, calibrate the vertical line, fix it in the appropriate direction with an iron frame or wood, and use a sand pump to send the mineral sand to the two feeding ports above the spiral. The sand is replenished with water and the density of the mineral mortar is adjusted. The mineral sand slurry naturally swirls from high to low, and a coherent centrifugal force appears in the flow speed of the rotating inclined plane. The density, specific gravity, particle size, and morphology of the sand ore are different, By using the functions of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated. The concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tail sand flows into the tail sand hopper and is moved to the sand tank through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. Rotating spiral chute III. Highlights: 1. Stable, easy to operate, and wide density range. 2. The material processing capacity is large, the enrichment ratio is high, and the probability of recovery is high. 3. Small space occupation, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast efficiency. Rotating Spiral Chute 4. Structure Composition: The fiberglass chute is composed of 6 parts, including a feeding homogenizer, a feeding trough, a rotating trough, a product cutting trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The rotating groove has a durable wear-resistant layer made in advance on each side. It has the advantages of light weight, firmness, and durability, which are not easy to damage consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing and averaging, which is easy to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed to the spiral groove surface through the feeding groove on the rotating groove head for sorting. The tail end of the rotating groove is equipped with a valve block type new equipment selection groove, which will classify the selected new products into three (or four) new products according to grade along the radial direction. To adjust the orientation of the valve block and change the width of each new equipment, it is necessary to cut it off. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The horizontal plane of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore. Rotary spiral chute V. Applicable field: FRP chute is suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and nonferrous metal minerals with complete density ratio difference. rotating spiral chute