Professional Gravity Separator Headstream Manufacturer

Technique of Iron Mine Spiral Chute
date:2023-07-20     source:huang    click:

Iron ore spiral chute technique 1. Describe that the beneficiation chute belongs to the inclined flow separation process. Mortar is provided on a inclined chute or slope. Under the driving force of flowing water, the mineral particle group is not tight and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with a significant proportion are retained in the groove or discharged from the bottom at low speed. After being distinguished and connected, fine ore dressing or tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of suitable structure, simple installation, small footprint, simple operation, stable beneficiation, clear beneficiation, large production capacity, high efficiency, high concentration ratio, high recovery rate, and reliable operation. And it has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. Iron ore spiral chute technique  铁矿螺旋溜槽技巧 III. Characteristics This product is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02MM. This product has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small land area, less water consumption, simple structure, no power, high output, easy installation, simple operation, low investment, and quick effectiveness. Technique 4 for the Spiral Chute of  铁矿螺旋溜槽技巧 Iron Ores. The Structure of the Fiberglass Reinforced Plastic Spiral Chute is composed of a feeding device, a cross (tripod), a feeding chute, a spiral chute, a receiving chute, a gathering bucket, and a trough pillar. Iron ore spiral chute technique 5. Use This equipment is used to separate iron ore, ilmenite, ferrochrome, pyrite, zircon, Rutile, monazite, phengite, wolframite, sand tin, tantalum niobium ore, niobium and other nonferrous metals, rare mineral metals and non-metallic minerals with different density and specific gravity. Technique of Spiral Chute for  铁矿螺旋溜槽技巧 Iron Mine