How much does a spiral chute cost per unit? Introduction: The chute beneficiation includes the inclined surface flow separation process. The slurry is fed to a partially inclined chute or inclined surface, and with the assistance of water flow, the mineral particle group becomes loose and layered. The light minerals on the upper part are quickly discharged to the outside of the chute, while the heavier minerals on the lower part stagnate in the inner chute or slowly discharge from the lower part. After obtaining each, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, making them ideal for sand mining by the sea, riverbanks, sandbanks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, high processing yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. It has the advantages of light weight, moisture-proof, rust prevention, corrosion prevention, strong adaptability to the fluctuation of feed volume and density, Granularity, and grade. 2、 Apply skills to make the FRP chute stand up, calibrate the vertical line, fix the iron frame or wood at the appropriate position, and let the sand ore be sent to the two ore inlets on the spiral top by the mortar pump. Add make-up water to mobilize the density of the mineral slurry. The mineral slurry naturally swirls from top to bottom. There is a coherent centrifugal force in the rotating slope flow speed, which is different in density, specific gravity, Granularity and shape of the mineral sand, After the gravity and centrifugal force of the swirling flow, the ore and sand are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand pit, and then discharged by a sand pump, completing the entire beneficiation process. How much does the spiral chute cost per unit? @ @ 000 3. Advantages and features: 1. Ultra high efficiency, high recycling rate, and precise mineral sorting; 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. How much is the price of a 
spiral chute per unit? 4. The structure of the fiberglass spiral chute consists of six parts: a feeding distributor, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. How much does a spiral chute cost per unit? 5. Application field: Fiberglass reinforced plastic chutes are used for processing 0.6-0.03MM and vein ore and ore sand, but high mud content is unfavorable for sorting. Currently, it has been widely used for processing iron ore, tungsten, sand tin, tantalum niobium, coastal and riverside sand mines, placer gold mines, and so on. How much is the price for a spiral chute at 
