Professional Gravity Separator Headstream Manufacturer

Titanium spiral chute selection
date:2023-07-20     source:huang    click:

Titanium selection spiral chute 1. Introduction: Gravity separation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. The spiral beneficiation machine is one of the gravity beneficiation machines, with a cross-sectional shape of cubic parabola, suitable for processing finer particle sizes of -0.2mm. During the sorting process, do not add flushing water, and cut off the fine, medium, and tailings in sections at the bottom of the tank. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Titanium concentrator spiral chute  选钛螺旋溜槽 III. Characteristic FRP spiral chute has attracted more attention among many heavy concentration machines due to its low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area, etc. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour.  选钛螺旋溜槽 Titanium selection spiral chute 4. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3MM, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. Selection of titanium spiral chutes 5. Scope of application: Fiberglass reinforced plastic spiral chutes are suitable for processing 0.6-0.03mm and vein and placer ores, but high mud content is unfavorable for separation. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others.  选钛螺旋溜槽 titanium spiral chute selection