Professional Gravity Separator Headstream Manufacturer

Spiral chute function
date:2023-07-20     source:huang    click:

Function of spiral chute 1. Describe that the beneficiation chute belongs to the inclined flow sorting step. Mineral mortar is provided to a partially inclined chute or inclined surface. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer is so light that the mineral quickly flows out of the groove, while the lower part of the heavy mineral material stagnates inside the groove or flows out at a low speed from the lower end. After obtaining it, concentrate and tailings are obtained. Spiral concentrator is a mining and beneficiation machine, especially ideal for sand mining on beaches, river beds, beaches, and streams. The equipment is reasonably structured, easy to install, occupies a small area, has simple operation, stable beneficiation, clear mineral separation, large production capacity, high efficiency, high enrichment ratio, high recovery rate, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Spiral chute function  螺旋溜槽作用 III. Advantages: 1. Stable, easy to operate, and with a large density range. 2. The material processing has a large production capacity, high concentration, and high recovery rate. 3. Small space occupation, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast efficiency. The function of the  螺旋溜槽作用 spiral chute is four. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating groove, an equipment acquisition groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. Function of spiral chute 5. The use of spiral chute is suitable for processing 0.6-0.03MM and this vein of ore and sand, but it is unfavorable for sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on.  螺旋溜槽作用 spiral chute function