Professional Gravity Separator Headstream Manufacturer

Double spiral chute
date:2023-07-20     source:huang    click:

Double Spiral Chute 1. Equipment Introduction: A gravity separation machine used for mineral mortar to perform lightweight and heavy mineral sorting due to the inertial centrifugal force that occurs during rotary spiral motion. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. Double spiral chute  双螺旋溜槽 III. The characteristics of FRP spiral chute are more concerned among many gravity separation machines because of its low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area, etc. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour.  双螺旋溜槽 double spiral chute 4. The structure of the spiral chute consists of a feeding device, a cross (tripod), a feeding groove, a spiral groove, an acquisition groove, a gathering bucket, and a groove pillar. Double spiral chute V. Applicable field: FRP chute is suitable for separating fine iron ore, ilmenite ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and nonferrous metal minerals with complete density ratio difference.  双螺旋溜槽 double spiral chute