Professional Gravity Separator Headstream Manufacturer

Spiral chute slurry concentration
date:2023-07-20     source:huang    click:

Spiral chute slurry concentration 1 indicates that the chute selection includes the inclined surface flow selection process. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. Spiral chutes are equipment for mining and beneficiation, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The mineral mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. Spiral chute slurry concentration  螺旋溜槽矿浆浓度 III. Advantages and characteristics: 1. Stable, easy to control, with a large concentration range. 2. The production and processing of materials have a high yield, high enrichment ratio, and high recovery rate. 3. Small usage space, low water consumption, simple construction, and no need for power. 4. It is simple to install, easy to operate, with minimal investment and fast returns. The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. Spiral chute pulp concentration 5. Purpose This machine is suitable for separating small materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metal ores, rare ore metals and non-metallic mineral bodies with gravity differences.  螺旋溜槽矿浆浓度 Spiral chute slurry concentration