Professional Gravity Separator Headstream Manufacturer

Gravity dust removal spiral chute
date:2023-07-20     source:huang    click:

Gravity dust removal spiral chute 1. Introduction: The chute sorting belongs to the slope flow sorting process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Gravity dust removal spiral chute  重力除尘灰螺旋溜槽 III. Advantages and characteristics: 1. Ultra high efficiency, high recycling rate, and precise mineral sorting; 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces.  重力除尘灰螺旋溜槽 Gravity dust removal ash spiral chute 4. Structural composition: The spiral concentrator consists of a feed equalizer, a cross (tripod), a feed chute, a rotating chute, a selection chute, a gathering hopper, and a trough support. Gravity dust removal ash spiral chute V. This equipment is suitable for separating other nonferrous metal ores, rare mineral metals and nonferrous metal mineral bodies with different specific gravity from iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous metal minerals with different specific gravity.  重力除尘灰螺旋溜槽 Gravity dust removal spiral chute