news

Sha Jin uses spiral chutes. Firstly, it is explained that the gravity separation spiral chutes integrate the characteristics of fiberglass spiral chutes, fiberglass spiral chutes, shaking tables, and centrifugal gold concentrators. After organizing relevant scientific research by the Ministry of Metallurgical Industry, the design, school, and other departments of the beneficiation enterprise have passed the operation appraisal. It is recognized that this equipment has excellent performance, advanced sorting indicators, and has also won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been recognized in the field of non-ferrous metals Ferrous mines are widely used. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphoethylene, tungsten ore sand, tin placer, tantalite, tantalum niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal ore objects due to gravity difference. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Sha Jin uses spiral chutes with a capacity of . 3. Features or advantages: 1. Super large-scale, large production capacity, and modern mineral processing objectively conditions the creation of benefits based on scale. 2. Fine granulation: for the treatment of fine particle minerals, especially the treatment of ore materials with a particle size of -0.047mm, the original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the GRP spiral chute has developed from simple use of gravity and water flow blocking force to composite centrifugal force, mechanical vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby improving the recovery rate of ore materials. 4. Based on energy conservation, consumption reduction and environmental protection, it should occupy a small area and space, and consume less water and electricity. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple, and it is convenient for maintenance and management. Sand Gold Spiral Chutes 4. Structural Composition: Spiral chutes are composed of ore feeding homogenizers, crosses (tripods), ore feeding chutes, spiral chutes, intercepting chutes, gathering buckets, and trough pillars. Spiral chutes for sand and gold processing. 5. Application field: Spiral concentrators are suitable for processing 0.6-0.03mm and vein ores and minerals, but high mud content is unfavorable for beneficiation. At present, it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal or riverside placer and gold ore, and so on. Sand Gold Spiral Chute