news

Chromite spiral chute 1. brief introduction of equipment a gravity mineral processing equipment that uses the continuous centrifugal force generated by mineral mortar in the spiral movement to achieve light weight and heavy mineral separation. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. Chromite spiral chute III. Features and advantages 1. Heavy duty and large output. In principle, modern mineral processing needs to create benefits through economies of scale. 2. Fine granulation, the treatment of fine and micro particle grade mineral aggregate is the treatment of minerals with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple application of gravity and water blocking force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of small or fine particles can be increased, thereby improving the mineral recovery rate. 4. With energy saving and environmental protection as the fundamental starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure, and convenient Computerized maintenance management system. Chromite spiral chute 4. The structure of the FRP spiral chute is composed of six parts, namely, feed leveler, feed chute, spiral chute, equipment access chute, product agglomeration hopper, and the slot support (including cross or tripod). The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. Chromite spiral chute V. This machine is suitable for separating iron ore, Ilmenite, chromite ore, pyrite ore, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other nonferrous metals, rare ore metals or nonferrous metal mineral bodies with different density and specific gravity from fine and small materials with a Granularity of 0.3-0.02MM. Chromite spiral chute