Professional Gravity Separator Headstream Manufacturer

Technique of Iron Mine Spiral Chute
date:2023-07-20     source:huang    click:

Iron ore spiral chute technique 1. Explanation: The chute sorting process includes inclined surface flow sorting. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Iron ore spiral chute technique  铁矿螺旋溜槽技巧 3. Features 1. Stable and easy control of sorting steps 2. Wide range of allowable changes in feed concentration 3. High enrichment and recovery rate 4. Small footprint and water consumption 5. Simple structure without power 6. Large output 7. Easy installation and operation 8. Small investment and quick effect  铁矿螺旋溜槽技巧 Iron ore spiral chute technique 4. Classification according to the particle size of the ore being processed, Chutes can be divided into three categories: (1) Coarse grained chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) The ore sand chute is used to handle 2-3 millimeter sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. Iron ore spiral chute technique 5. This machine is suitable for separating iron ore, Ilmenite, chromite ore, pyrite ore, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity. Technique of Spiral Chute for  铁矿螺旋溜槽技巧 Iron Mine