Professional Gravity Separator Headstream Manufacturer

Installation video of spiral chute coal washing
date:2023-07-20     source:huang    click:

Video of Spiral Chute Coal Washing Installation: Introduction to the beneficiation chute, including the inclined flow separation process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. Spiral chute coal washing installation video  螺旋溜槽洗煤安装视频 3. Features 1. Stable selection process and easy operation 2. Wide range of allowable changes in feed density 3. High enrichment ratio and high recycling rate 4. Small land area and low water consumption 5. Simple structure without power 6. Large processing output 7. Easy installation and easy operation 8. Minimal investment and quick results  螺旋溜槽洗煤安装视频 Spiral chute coal washing installation video 4 The structural composition of the fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a cutting chute, a gathering bucket, and a trough support. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Installation video of spiral chute coal washing for  螺旋溜槽洗煤安装视频