The tungsten tin tailings beneficiation production line is an equipment used to separate useful minerals from tungsten tin tailings. This production line mainly consists of vibrating feeders, jaw crushers, cone crushers, ball mills, spiral classifiers, flotation machines, thickeners, filters, and other equipment. This article will introduce the operating steps and precautions of the tungsten tin tailings beneficiation production line.
1、 Vibration feeder
The vibrating feeder is the first equipment in the tungsten tin tailings beneficiation production line, mainly used to feed raw ore into a jaw crusher. When using a vibrating feeder, the following points need to be noted:
The amplitude and frequency of the vibrating feeder should be adjusted based on the properties and particle size of the ore.
2. When using a vibrating feeder, attention should be paid to the stability and reliability of the vibrating feeder to avoid malfunctions such as material jamming.
II. Jaw crusher
The jaw crusher is the second equipment in the tungsten tin tailings beneficiation production line, mainly used to break the raw ore into appropriate particle sizes. When using a jaw crusher, the following points need to be noted:
1. The size of the feed port of the jaw crusher should be adjusted according to the particle size of the raw ore to prevent oversized or undersized ore from entering the crusher.
2. When using a jaw crusher, attention should be paid to the maintenance and upkeep of the crusher, regular inspection of vulnerable parts of the crusher, and timely replacement.
3、 Cone crusher
The cone crusher is the third equipment in the tungsten tin tailings beneficiation production line, mainly used to further refine the ore after being crushed by the jaw crusher. When using a cone crusher, the following points need to be noted:
1. The size of the discharge port of the cone crusher should be adjusted according to the size of the feed port of the next equipment to avoid the ore being too large or too small.
When using a cone crusher, attention should be paid to the adjustment and maintenance of the crusher to avoid malfunctions such as material jamming.
4、 Ball mill
The ball mill is the fourth equipment in the tungsten tin tailings beneficiation production line, mainly used for fine grinding the ore crushed by the cone crusher. When using a ball mill, the following points need to be noted:
1. The size and quantity of grinding balls in the ball mill should be adjusted according to the properties and particle size of the ore to achieve the best grinding effect.
2. When using a ball mill, attention should be paid to the maintenance and upkeep of the mill, regular inspection of vulnerable parts of the mill, and timely replacement.
5、 Spiral classifier
The spiral classifier is the fifth equipment in the tungsten tin tailings beneficiation production line, mainly used to classify the ore after being ground by the ball mill. When using a spiral classifier, the following points need to be noted:
1. The spiral blades of the spiral classifier should be adjusted according to the properties and particle size of the ore to achieve the best classification effect.
When using a spiral classifier, attention should be paid to the stability and reliability of the classifier to avoid malfunctions such as material jamming.
6、 Flotation machine
The 
flotation machine is the sixth equipment in the tungsten tin tailings beneficiation production line, mainly used for flotation of ore after being classified by a spiral classifier. When using a flotation machine, the following points need to be noted:
The air volume and reagent dosage of the flotation machine should be adjusted based on the properties of the ore and the flotation effect.
2. When using the flotation machine, pay attention to its stability and reliability to avoid foam overflow and other failures.
7、 Thickener
The thickener is the seventh equipment in the tungsten tin tailings beneficiation production line, mainly used to concentrate the ore after flotation by the flotation machine. When using a thickener, the following points should be noted:
The inclination angle and concentration effect of the thickener should be adjusted based on the properties and concentration effect of the ore.
When using a thickener, attention should be paid to its stability and reliability to avoid faults such as incomplete separation of mud and water.
8、 Filter
The filter is the last equipment in the tungsten tin tailings beneficiation production line, mainly used to filter the concentrated slurry and obtain dry ore. When using a filter, the following points should be noted:
1. The filtration speed and effectiveness of the filter should be adjusted based on the properties and effectiveness of the ore.
2. When using the filter, attention should be paid to the maintenance and upkeep of the filter, regular cleaning of the filter cloth, and timely replacement of vulnerable parts.
summary
The tungsten tin tailings beneficiation production line is a device used to separate useful minerals from tungsten tin tailings, consisting of vibrating feeders, jaw crushers, cone crushers, ball mills, spiral classifiers, flotation machines, thickeners, filters, and other equipment. When using the tungsten tin tailings beneficiation production line, it is necessary to pay attention to the operating steps and precautions of each equipment to ensure the stable operation and efficient production of the production line.
