Incineration power generation is a modern way of energy utilization, which can convert urban garbage into electricity and heat energy, and reduce the pollution of garbage to the environment. However, in the process of Incineration, a large amount of slag will be generated, which contains a large number of metal and inorganic substances, and needs to be screened and treated in order to better recycle.
The slag screening equipment for Incineration power generation is a kind of equipment specially used for screening and processing the slag, which can separate the metal and inorganic substances in the slag to achieve the purpose of recycling. Next, we will introduce the operation steps and precautions of the slag screening equipment for Incineration power generation in detail.
Introduction to Equipment
The slag screening equipment for Incineration power generation is mainly composed of feeding system, screening system, separation system, discharging system, etc. The feeding system sends the slag into the screening system, which divides the slag into different particle sizes and then sends it to the separation system. The separation system separates the metal and inorganic substances in the slag through gravity, magnetic force, and other methods, and finally sends the separated substances into the discharge system.
II. Operation Steps
1. Preparation work
Before using the slag screening equipment for Incineration power generation, it is necessary to carry out equipment inspection and maintenance. Check whether the electrical system, lubrication system, transmission system and other parts of the equipment operate normally, and check whether the screening screen is damaged or blocked.
2. Start the device
Before starting the equipment, it is necessary to first feed the slag into the feeding system, and then start the equipment according to the requirements of the equipment manual. When starting the equipment, it is necessary to pay attention to safety and avoid accidents.
3. Adjust the screening system
The screening system is the core part of the slag screening equipment for Incineration power generation. The screening system needs to be adjusted according to the particle size of the slag. Usually, the screening system includes multiple layers of screens, and the size and quantity of screens can be adjusted as needed.
4. Separation of metal and inorganic substances
The separation system is a key part of separating metal and inorganic substances from the slag. The separation system usually includes equipment such as magnetic separators and airflow separators, and different separation methods can be selected according to needs.
5. Discharge system
The discharge system is the part that sends the separated metal and inorganic substances out of the equipment, and suitable discharge methods need to be selected according to the needs. Equipment such as conveyor belts and bucket elevators can be used.
3、 Precautions
1. When using the slag screening equipment for Incineration power generation, attention should be paid to safety to avoid accidents.
2. The screening and separation systems need to be adjusted and selected based on the particle size and composition of the slag to achieve the best separation effect.
During the use of the equipment, regular inspections and maintenance are required to maintain its normal operation and lifespan.
4. When dealing with slag, it is necessary to pay attention to environmental issues and avoid pollution to the environment.
In a word, the slag screening equipment for Incineration power generation is an important energy utilization equipment, which can separate the metal and inorganic substances in the slag to achieve the purpose of recycling. When using equipment, it is necessary to pay attention to safety and environmental issues, follow operating procedures, and ensure the normal operation and service life of the equipment.
