Professional Gravity Separator Headstream Manufacturer

Procurement of spiral chutes
date:2023-07-20     source:huang    click:

Procurement of spiral chutes 1. Description: Gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low pollution and low cost. The fiberglass spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2mm, and does not require flushing water in the sorting process. The tail part of the chute is selected in sections to select fine, medium, and tailings. 2、 The principle of operation is that the spiral concentrator does not limit the placement of the mineral screening device on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Purchase spiral chutes  采购螺旋溜槽 III. Featured FRP chutes are particularly concerned among various gravity beneficiation equipment due to their low energy consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large output per unit size and other characteristics. The equipment has a wide and relatively stable groove surface, and the area where the slurry flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm have been produced in China, Ф The processing capacity of 1200MM four head is about 4-6 t/h.  采购螺旋溜槽 Purchase spiral chute 4. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum feeding particle size is more than 2-3mm, and the maximum feeding particle size is 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. Purchase spiral chute V. This machine is suitable for sorting iron ore, ilmenite ore, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphate ore, tungsten ore sand, tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with specific gravity differences.  采购螺旋溜槽 Procurement of spiral chutes