What is the spiral chute blade like? Firstly, introduce that the chute sorting of minerals belongs to the inclined flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water flow, the ore particles are loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay inside the groove or slowly discharge from the lower part. After being connected separately, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machines for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear beneficiation, strong processing ability, high efficiency, high concentration of beneficiation, high recycling rate, and reliable operation. It has the advantages of lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. What are the highlights or characteristics of the spiral chute blades? 1. Extremely high efficiency, high recovery rate, and accurate mineral processing; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. What are the blades of the 
spiral chute? 4. The structure of the fiberglass spiral chute is composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a receiving groove, a gathering bucket, and a groove support. What is the blade of spiral chute? 5. Range of application Spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. What is the spiral chute blade like at 
