Jiangxi Small Spiral Chute Price 1. Introduction: Chute beneficiation belongs to the slope flow beneficiation process. Mortar is fed to some inclined grooves or slopes, and under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly flows out of the groove, while the lower layer of minerals with high specific gravity remain inside the groove or are discharged from the bottom at a low speed. After separation and collection, selected minerals and tailings can be obtained. The spiral concentrator is a machine for mining and beneficiation, making it ideal for mining ore in bays, river beds, sand banks, and streams. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, large processing volume, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The principle of operation is that the slurry is slowly fed to the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The tail of the spiral groove is equipped with a valve type product acquisition groove, allowing other equipment to be classified into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each product, the equipment gathering bucket will densely extract the intercepted multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine materials. The price of Jiangxi small spiral chute is 
. 3. The special spiral concentrator has attracted more attention among various gravity separation equipment due to its low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear ore screening, no need for moving parts, convenient Computerized maintenance management system, large handling capacity per unit size and other characteristics. Machinery with wider or flatter groove surfaces and larger areas of laminar flow of ore slurry are more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been produced domestically, Ф The processing output of 1200mm four heads is about 4-6 tons/hour. The price of Jiangxi small spiral chute is 4. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment acquisition groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. Jiangxi Small Spiral Chute Price V. Scope of Use Spiral chutes are suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Price of Jiangxi Small Spiral Chute at 
