Professional Gravity Separator Headstream Manufacturer

Jiangxi spiral chute
date:2023-07-20     source:huang    click:

Jiangxi Spiral Chute 1. Explanation: Chute sorting belongs to the inclined surface flow sorting process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. Jiangxi Spiral Chute  江西螺旋溜槽 III. Advantages: 1. Stable, easy to operate, and with a large density range. 2. Large material processing output, high enrichment ratio, and high recycling probability. 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns.  江西螺旋溜槽 Jiangxi Spiral Chute 4. Structural Composition: The spiral concentrator consists of a feed equalizer, a cross (tripod), a feed chute, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. Jiangxi spiral chute 5. Use This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, tungsten ore, tin, tantalum niobium, tantalum niobium and other non-ferrous metal ores, rare ores, gold minerals and non-metallic minerals with specific gravity difference from 0.3-0.02mm fine materials.  江西螺旋溜槽 Jiangxi spiral chute