news

Fine Sand Spiral Chute 1. Product Introduction: A gravity beneficiation equipment that utilizes the inertial centrifugal force that occurs during the spiral rotation movement of mineral slurry to separate light and heavy mineral materials. 2、 The uniform mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for selection. The tail of the spiral groove is equipped with a valve type product acquisition groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper enables the selected multi head ore flow to be densely led out. The transverse section of the fiberglass chute has a change in the slope of the curve, which is particularly suitable for the selection of fine-grained materials. Fine sand spiral chute III. Characteristics 1. Stable separation process and simple control 2. Large allowable range of ore feed concentration 3. High enrichment ratio and high recovery rate 4. Small area occupied, low water consumption 5. Simple structure, no power required 6. Large production capacity 7. Simple installation and easy operation 8. Small investment and quick results Fine sand spiral chute 4. Classification and processing of ore Granularity, Chutes can be divided into three types: (1) Coarse spiral chutes, with a maximum particle size of 2-3mm or more for feeding, and a maximum size of 100-200mm. (2) Sand ore chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074MM. Fine sand spiral chute V. The application scope of glass fiber reinforced plastic chute is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and specific gravity difference. Fine Sand Spiral Chute