Professional Gravity Separator Headstream Manufacturer

Installation diagram of spiral chute valve
date:2023-07-20     source:huang    click:

Spiral chute valve installation diagram 1: Introduction: The fiberglass spiral chute summarizes the characteristics of gravity separation spiral chutes, spiral chutes, shakers, and centrifuges used for beneficiation. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is believed that this machine has excellent performance, advanced sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 The mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding chute installed at the end of the rotating groove head, and selected for operation. The tail of the rotating groove is equipped with a valve block type product cutting groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly, which is applied to the selection of fine ore materials. Installation drawing of spiral chute valve  螺旋溜槽阀门安装图 III. Special features 1. Stable selection process and easy operation 2. Large allowable range of feed density 3. High enrichment ratio and high recycling rate 4. Small land occupation area and low water consumption 5. Simple structure without power 6. Large processing capacity 7. Easy installation and simple operation 8. Small investment and quick results  螺旋溜槽阀门安装图 Installation drawing of spiral chute valve 4 The spiral chutes are composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove pillar. Installation Drawing 5 of Spiral Chute Valve: Scope of Application: Fiberglass reinforced plastic spiral chutes are suitable for processing 0.6-0.03MM and vein or placer ores, but high mud content is unfavorable for sorting. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Installation Drawing of Spiral Chute Valve for  螺旋溜槽阀门安装图